SMARTY TOUCH 98.5-18 RAM CUMMINS

Product Description

Smarty Touch Programmer 98.5-18 Dodge Cummins

The Smarty Touch S2G is the latest and greatest hardware from MADS Smarty. It packs all the benefits of the proven Smarty tuner software into a 4.3″ display, all while adding a lot of new features and covered vehicles.

MADS Smarty is one of the originators of electronic performance for the 24 Valve and Common rail Cummins engines. Their tuners are known for their adjustability, overall performance,  and compatibility with the Cummins/Chrysler software. As far as a “box” tuner, Smarty is the preferred option for Cummins owners.

Dyno Tested!

The tunes are tested on stock trucks on a chassis Dyno. Stock means just that. Stock! Even the air filters were stock…
Smarty checked the “baseline” (the stock truck hp at the rear wheels) twice in a day in order to be sure about the findings. The below declared HP numbers are all rounded down to the closest number. For example, the 90 hp file actually did 96 hp. That’s a 90 hp software, not a 100. The 210 hp was 215 hp. 

The horsepower settings have a modified “Torque management” (TQM). The throttle response is greatly improved, but is set to a safe limit. With “Safe”, I mean safe for your transmission and the rest of the driveline.

Notable features:

• 4.3″ Touch Display. Resolution 480 x 272 – 16.3 million colors.
• Two devices: Smarty Touch Display and Smarty Touch Controller, each with its own CPU. The Display for the graphics & user interface and the controller for communicating with the ECM.
• Fastest display start up in the industry. Just four seconds!
• Fastest ECM download in the industry, up to three times faster than the competition, a typical ECM update takes 1.5 to 6 minutes, depending on the model year.
• Small micro USB cable connecting the display and the controller for easy installation.
• MicroSD card for simple and fast updates (included), can also store multiple UDC tunes
• Fully Internet updateable. Updates are always FREE!
• EGT sensor (optional). Reads accurately up to over 2200°F.
• Communication module (optional). Tunes real time parameters while the engine is running, for CR 6.7L 2010+ trucks, and unlocks the MY 2013+ ECMs.

There’s more…

• UDC Pro RT software (optional). Customizing tune software with real time parameters. (Requires Communication module.)
• Four dashboards, each configurable with five different gauge layouts.
• Two alarms (high and a low range) can be configured for each PID.
• Customizable display background.
• Supports over 300 SAE and Proprietary PID’s.
• CaTCHER software with ten power levels.
• Works with our UDC and UDC Pro RT (Firmware 1.1.2 or recent is required) custom tuning software (for CR 5.9L and for 6.7L trucks).
• ABS tire height updates in just seconds.
• Cold weather 3 Cylinder High Idle enabled for 1998.5 – 2002 VP 5.9L trucks.
• Manual High Idle is enabled in all software versions for CR 5.9L trucks (excluded MY 2003).
• Reads Diagnostic Trouble Codes in plain text and clears codes.
• Programmable Speed Limiter from 25 to 250 mph.
• TNT-R and SSR software available for CR 5.9L trucks (Requires unlock code).
• Power on Demand “PoD” for CR 5.9L and 2007 – 2009 6.7L trucks.

*Not for sale or use in California