Product Description
Dodge Cummins 5.9 03-07 Fuel Control Actuator (FCA)
Bosch OEM Genuine New FCA (fuel control actuator) for Dodge Cummins 5.9 L is installed in CP3 pump (fuel pressure regulator). The fuel control actuator comes with new attachment screws.
Fits: 2003, 2004, 2005, 2006, 2007 Dodge Cummins 2500, 3500
A common CP3 pump related failure on Cummins is the fuel control actuator (FCA), referred to by Bosch as an MPROP. The FCA is the metering device, that directs fuel to the pumping plungers for the CP3 injection pump.
If the FCA is sticky, stuck or not working properly, the ECM cannot quickly command the FCA to the correct position and control how much fuel it should be delivering. Or it may cause a surge, excess smoke, or poor throttle response, because it is slow to respond. In most cases, people first know there is an issue when they have a hard start or no start issue because the FCA will not allow the pump to properly build pressure to start. The FCA has probably been delivering less than the desired amount of fueling and is usually a slow death, due to wear, and not an immediate failure.
If you’re experiencing hard start or no start issues, one easy way to confirm whether the FCA is causing the issue is to simply unplug it, thus eliminating any metering. Presuming the truck starts, immediately shut it off as you will have maximum fuel rail pressure, but now you have a potential culprit with the FCA causing the issue. However, on the 5.9L we do see a lot of injector issues that cause a hard start / no start, particularly on cold start.
OEM part number: 5183245AA, 0928400666,5261237, 4937283, 1465ZS0052, V837071191 AGCO Massey Ferguson, 6754-72-1212 Komatsu
Part Number: 1465ZS0062
Clint Connelley (verified owner) –
Good service, came on time and simple to install. Your web site was very helpful.